- Home
- ยป
- Our Products
- »
- Safety Helmets
Safety Helmets
Minimum Order Quantity: 6 Litre
| Packaging Size | 1 liter |
| Country of Origin | Made in India |
DIRECTIONS FOR USAGE:
To achieve successful installation, follow these steps:
-
Ensure surrounding temperature between 10°C-40°C
-
Ensure protection from sunlight and humidity exposure until complete curing
-
Ensure Pre-test do a small area trial test patch, check for 24 hours to get desired
Surface Preparation:
-
The surface must be clean, totally dry, and free from waxes, coatings, dirt, soiling, or stains.
-
Use Stonito stone cleaning solutions for cleaning, followed by rinsing with water.
-
Ensure the stone is completely dry before further protective treatment.
-
Complete the cleaning process at least 2 days before applying the sealer.
-
Mask off areas not to be treated with appropriate coverings
Coating Procedure:
-
Ensure clean, masked surfaces and proper ventilation
-
Shake the container well before opening.
-
Do not dilute the product.
-
Apply an even coat of Stonito Armour with a paint brush, roller or cloth.
-
Do not use a power sprayer
-
Allow the sealer to penetrate for 15-30 minutes, then remove any excess with a clear, dry cloth.
-
For porous surfaces, apply a second coat after 30-40 minutes, following the same procedure.
-
To remove residue, reapply a thin coat, wait 2-3 minutes, rub with a dry nylon pad, and clean thoroughly with a dry cloth.
-
Full protective effect develops within 24-72 hours, full efficiency is reached after 4-7 days.
-
Clean tools and tackles with mineral spirits immediately after use.
-
Armour is suited to achieve water, grease, oil, stain and dirt repellent treatment of rough natural and artificial stones.
-
Highly recommended for sand stone, bricks, lime-based, granite and silicate-based stones
Recommended Substrates:
-
Marbles | Sandstone | Granite | Slate Soinhofer |
-
Dark colored stones | Clay Bricks
COVERAGE
- Up to 30 sq. mtr. /litre, depending on absorptive capacity of stone.
-