- Home
- ยป
- Our Products
- »
- Vacuum Impregnation Plant
Vacuum Impregnation Plant
Minimum Order Quantity: 6 Piece
| Packaging Size | 1 liter |
| Country of Origin | Made in India |
DIRECTIONS FOR USAGE:
To achieve successful installation, follow these steps:
-
Ensure surrounding temperature between 10°C - 40°C
-
Ensure protection from sunlight and humidity exposure until complete curing
-
Ensure Pre-test: do a small area trial test patch, check for 24 hours to get desired
Surface Preparation:
-
The surface must be clean, totally dry, and free from waxes, coatings, dirt, soiling, or stains.
-
Use Stonito stone cleaning solutions for cleaning, followed by rinsing with water
-
Ensure the stone is completely dry before further protective treatment.
-
Complete the cleaning process at least 2 days before applying the sealer
-
Mask off areas not to be treated with appropriate coverings
Coating Procedure:
-
Ensure clean, masked surfaces and proper ventilation.
-
Shake the container well before opening.
- Apply an even coat of Stonito Impregnator with a paint brush, roller or cloth.
-
-
Do not use a power sprayer.
-
Allow the sealer to penetrate for 15-30 minutes, then remove any excess with a clean, dry cloth.
-
For porous surfaces, apply a second coat after 30-40 minutes, following the same procedure.
-
To remove residue, reapply a thin coat, wait 2-3 minutes, rub with a dry nylon pad, and clean thoroughly with a dry cloth.
-
Full protective effect develops within 24-72 hours; full efficiency is reached after 4-7 days.
-